Reverse liner atomizer sprayer 2000 lit

Polyethylene poison tank with 1000 and 2000-liter capacity, equipped with system washing tank and hand-washing tank, valved lid, resistant to sunlight, Turk hydraulic steerer

Equipped with Turk drainage valve of tank, poison tank’s level meter

The linear fan is equipped with a reverse system.

Even wind distribution in the whole surface of the fan and subsequently similar wind exit from all grids

Suctioning air coming from the fan’s back to prevent dust, soil, garbage, etc. entering the fan

Equipped with two fixed fans and one moving fan

Equipped with spray terminal for even distribution of poison between all nozzles and subsequently same poison exit from nozzles

10m width of spray from each side

Fan’s pieces fully consist of bent and laser cut sheets with 2-, 3- and 5-mm thickness

Equipped with a large two-speed fan round riser gearbox

Equipped with 24 two-head anti-drip nozzles made of brass with powdery and even poison spray

All hoses used in the fan and chassis are high-pressure hoses with one steel wire layer.

Trailed chassis has two standard connection points for easy connection to the tractor and proper controllability following the tractor and connecting two points.

Chassis pieces are fully made of bent and laser cut sheets with 5, 8, 12, and 20mm thickness

The chassis has an axle with spring and the wheel with a regulatable height of up to 18cm in the vertical direction within two modes and adjusting the horizontal distance between the wheels in 3 modes

Equipped with two Turk-wide tires, and one pair of tractor mudguards to prevent mud from splashing on the machine

Equipped with Turk filling system, Turk valved filter 220, Turk wide-angle shaft

Two brass-made sand fillers are separately installed to inject poison into the nozzles at the left and right hands of the fan.

Fan’s body and chassis are coated with six epoxy primer layers and six layers car grey metallic color.